support hotline
0577-57572522
I. Performance:
The ENQ pointer torque screwdriver is a new product developed by our company that is suitable for automotive, motorcycle, machinery manufacturing, electronics and other industries, as well as professional testing industries. Detect, easy to hold, easy to use and maintain sharpness for a long time. It is a tool for assembling and repairing equipment and testing the performance of tightening components.
Features:
1. Dial pointer indication:
The pointer indicates the torque value, and the reading is convenient, accurate and high precision.
2. With driven needle:
When the customer rotates to the corresponding measurement value, the driven needle stops and it is convenient for the customer to read the accurate measurement value.
3. Can be reversed left and right:
This product can be rotated either clockwise or counterclockwise.
4. Reasonable design:
Hand-held operation, long-term use without fatigue.
5. Easy operation:
As long as the zero position is aligned, anyone can operate it in the same way.
6. There is one Phillips and flat-blade screwdriver head inside, which allows customers to replace the screwdriver head according to the items they want to measure.
7, equipped with a booster rod, when customers use a large range of torque drivers, can better operate this product.
Product size:
1. Length (L): 270 (mm)
2. Width (W): 98 (mm)
3. Height (H): 100 (mm)
Various models:
|
model |
Range (N · m) |
Accuracy (%) |
Length (mm) |
|
ENQ-0.6 |
0.1-0.6 |
5% |
270 |
|
ENQ-1.2 |
0.2-1.2 |
||
|
ENQ-3 |
0.25-3 |
||
|
ENQ-6 |
0.5-6 |
||
|
ENQ-9 |
0.75-9 |
||
|
ENQ-12 |
1-12 |
V. Usage:
1. Be sure to zero before using to ensure the measurement accuracy of this product. The specific zero adjustment method is as follows:
(1): Loosen the lock nut on the torque screwdriver, turn the dial to make the pointer point to zero, and then tighten the lock nut on the torque screwdriver;
(2): After aligning with the zero position, if you need to measure clockwise, twist the handle gently clockwise, and then loosen it naturally to align the fixed pointer with the zero position of the dial. The zero position is not aligned, and then the fixed pointer is aligned with the zero position again according to the method of the first item. Once aligned to zero, you can turn clockwise.
(3): After aligning with the zero position, if you need to measure counterclockwise, gently twist the handle counterclockwise, and then loosen naturally to align the fixed hand with the zero position of the dial. The zero position is not aligned, and then the fixed pointer is aligned with the zero position again according to the method of the first item. Once aligned to zero, you can turn counterclockwise.
2. During use, the product must be kept vertical with the item to be measured by the customer, otherwise the measurement accuracy of the product will be reduced and the service life of the product will be reduced.
3. After use, adjust to zero position for future use.
Six, matters needing attention:
1. This product is only suitable for tightening and testing within the calibration range, and is not allowed to be used as other tools.
2. The measured values of this product have been corrected. It is not allowed to open the back cover and loosen the set screws on the product, so as to avoid errors in the measurement accuracy.
3. This product should not be in contact with acids, alkalis and corrosive gases.
